You are browsing the version of USA & Canada. Do you want to access the global version?
- Industry
- Complementary Products
- Primers and fillers
Primers and fillers industry
-
PRIMANYL 5011 Vinyl [+ info]
PRIMANYL 5011
VinylPhospho-vinyl 2K primer, antirust, chromate-free. Provides adhesion to every type of metal substrate. Recommended dry film, 10 microns. Re-coatable with all systems except epoxy. Available in white and beige. Mixing ratio 1:1. This corresponds to the product PRIMANYL... -
PRIMANYL 5401 Epoxy [+ info]
PRIMANYL 5401
EpoxyOne component ester-epoxy type primer, anti-corrosion, medium thickness, with adhesion to metals (iron/steel, galvanised, aluminium etc.). Re-coatable with 1K and 2K enamels, wet on wet. Available in white and grey. The use of solvents DS165 or DS238at 20-25% are recommended. This corresponds to the product PRIMANYL 114 in the previous naming system. To... -
PRIMANYL 5501 Epoxy [+ info]
PRIMANYL 5501
EpoxyOne component epoxy primer, weldable (conductive and non-toxic smoke) and anti-corrosion. Low thickness (10 micron approx. dry film) with adhesion to metals (iron/steel, galvanised, aluminium etc.), re-coatable with 1K and 2K enamels. The use of solvent DS238 up to 30% is recommended. This corresponds to... -
PRIMAPOX 6021 Epoxy [+ info]
PRIMAPOX 6021
Epoxy2K EPOXI Primer, anti-corrosion, medium thickness, with adhesion to metals (iron/steel, galvanised, aluminium etc.). Re-coatable with 1K and 2K enamels, paintable wet on wet. Available in white and grey. This corresponds to the product PRIMAPOX 252 in the previous naming system. To see the equivalence of names between the old version... -
PRIMAPOX 6041 Epoxy [+ info]
PRIMAPOX 6041
Epoxy2K EPOXI Primer, anti-corrosion, high thickness with adhesion to metals (iron/steel, galvanised, aluminium etc.). Re-coatable with 1K and 2K enamels, paintable wet on wet. Available in white and beige. This corresponds to the product PRIMAPOX 254 in the previous naming system. To see the equivalence of names between the old... -
PRIMAPOX 6041 TINTABLE Epoxy [+ info]
PRIMAPOX 6041 TINTABLE
Epoxy2K EPOXI TINTABLE Primer, anti-corrosion, high thickness, with adhesion to metals (iron/steel, galvanised, aluminium etc.). Re-coatable with 1K and 2K enamels, paintable wet on wet. -
PRIMALKYDE 7001 Synthetic [+ info]
PRIMALKYDE 7001
SyntheticOne component antirust alkyd primer, medium thickness with adhesion to iron/steel, re-coatable with 1K enamels. Available in white, black, red, grey and tintable with 5-10% DISOLAC bases. DS238 solvent at 10-20% is recommended. This corresponds to the product PRIMALKYDE 1221 in the previous naming system. To see the equivalence... -
PRIMAPUR 9041 Polyurethane [+ info]
PRIMAPUR 9041
PolyurethaneTwo-component polyurethane primer designed for repairing commercial vehicles. This product is aimed at the bus, truck cab, van, taxi market, etc. -
PRIMAPUR 9141 Acrylic [+ info]
PRIMAPUR 9141
AcrylicTwo-component acrylic sealer suitable for refinishing any surface. This product is designed to get the most out of your time. Its main function is to make it possible to apply the final product without the need to sand the surface to be repainted. It is aimed at the refinishing of... -
PRIMAPUR 9051 Polyurethane [+ info]
PRIMAPUR 9051
Polyurethane2K polyurethane primer, anti-corrosion, with adhesion to every type of metal substrate. Fast drying and wet on wet painting. Can be used as a high built primer due to its low tendency to sag. Sandable and re-coatable with the entire product range. Hardener ratio is 5:1. It is available in white and... -
PRIMAPUR 9071 Polyurethane [+ info]
PRIMAPUR 9071
PolyurethanePrimer with good adhesion on numerous substrates. It was specifically designed for use on plastics but it also adheres to any metal and wood. Therefore, the 9071 total grip is a highly versatile product and has applications in different sectors: signage, urban... -
PRIMAPOX 6051 2K [+ info]
PRIMAPOX 6051
2K2K epoxy primer with adhesion to all types of metal (iron/steel, galvanized metal, aluminum, etc.). A highly versatile primer that is applicable with spray guns and Airless and Airmix equipment. It is also recommended as a filler layer.It can be repainted with any binder from the DISOLAC tintometric system. Available in gray. Perfect for achieving high thicknesses to cover defects without peeling.
We’d love to get to know you better.
The most important person at Roberlo is you. Tell us your concerns and we’ll be delighted to help.
1607 NW 82nd Avenue
33126 Doral, Florida
US
Learn more +1 (786) 221-4412
Register for our Newsletter
Get all the latest news and new product information direct from Roberlo by email. Unquestionably the quickest way to get updated!
- Copyright © 2021 Roberlo
- Legal note and privacy policy
- Cookies